The
Port of San Diego is celebrating the installation of a $7.1 million system that enables cruise ships at berth to be powered by a shore-side electrical source.
With the completion of the system, the port becomes the fifth port in the world and the second in California with the capability of powering a cruise ship from shore.
Port executives, including Port Commissioner
Michael B. Bixler and County Supervisor
Greg Cox helped dedicate the system during a ceremony at the
B Street Cruise Ship Terminal on Saturday, December 11, 2010.
Holland America Line’s cruise ship
MS Oosterdam was at the terminal for the launch and was powered from the shore while in port.
The infrastructure that provides shore power to cruise ships docked at the B Street terminal will also have the capability of powering a ship docked at the new Port Pavilion on Broadway Pier, which will serve as both an event center and auxiliary cruise ship terminal when it opens later this month.
Shore power technology, also known as cold ironing, is just one of the initiatives the port of San Diego has implemented to minimize its impact on the environment through its
Green Port Program.
“Ships are our largest single source of air emissions and this project is going to significantly reduce those (harmful) emissions,” said
Michelle White, manager of the Green Port Program. “It’s going to be a huge benefit to the community.”
Typically, when a cruise ship is in port, the vessel’s diesel engines continue to run to provide onboard services for passengers and crew. Now, a ship can shut down its engines and instead plug into the shore power system to generate power.
“It’s a huge electrical system,” White said. “We can provide up to 12 megawatts of power. That’s enough to power a large college campus.”
White said that when a cruise ship uses the shore power system while docked, it prevents approximately one tonne of pollutants from entering the air.
“A lot of ports globally are looking at shore power, and we are on the cutting edge,” White said. “We will be the fifth port in the world to use shore power for cruise ships.”
The Port of
San Francisco was the first port in California to complete installation of shore power for cruise ships.
To help pay for the system, the port was awarded a $2.4 million state Carl Moyer grant by the California Air Resources Board through the county’s Air Pollution Control District. This is the first shore power system the Carl Moyer grant has funded.
“This project accomplishes substantial reductions in the emissions of harmful air pollutants from cruise ships and is a benefit to everyone in San Diego County, who will now breathe cleaner, more healthful air,” said
Bob Kard, Air Pollution Control Officer-Director.
Initially, one cruise ship can be powered from shore at a time. Eventually, the system will be able to power two cruise ships simultaneously, either at B Street or at the terminal and event center on Broadway Pier.
The infrastructure was installed by
Cochran Electric, Inc., which has perfected the shore power standard for cruise ships. The company has installed shore power for the ports in
Seattle, San Francisco and
Vancouver.
Under a measure adopted by the California Air Resources Board to reduce emissions and associated health risks, beginning Jan. 1, 2014, a cruise line must use shore power for 50 percent of its calls to a port. Last year, there were 223 cruise ship calls to the port of San Diego, bringing more than 800,000 passengers.
The shore power project supports the San Diego’s Green Port Program, which unifies the port’s environmental sustainability goals in six key areas: water, energy, air, waste management, sustainable development, and sustainable business practices.
